Selecting the correct dining table size is an important aspect as it holds the ability to create a visual balance to your room, whilst combining the functional requirement to seat the correct number of people.
When you opt for a Meraki dining table you’re not fixed to a predetermined size and have the option to select any size which will work both for your room and your practical needs.
Popular sizes are 1600mm/1800mm & 2000mm, which comfortably seat 6 – 8 people and allow for seating spaces of 600mm – 800mm per person.
A minimum table width of 875mm allows for seating either side and serving plates in the centre, however it is not unusual for clients to ask for narrower widths on smaller sizes and wider widths on larger sizes.
To keep the width to length ratio visually balanced its also common to go to a wider size of 1000mm wide when the table becomes 2000mm long.
Ideally, you’ll be looking for a table size which when situated doesn’t under or overwhelm its new space. It’ll also need to meet its functional needs of seating your family and friends.
As guide, if you’re replacing an existing table and worked for you, buy the same size again. If you have a new space, then a great tip is to use either carboard templates or masking tape and place them in the areas where your table and other furniture will be situated.
Also take into consideration the space required to pullout chairs or benches to enable seating comfortably. Generally, 800mm – 1000mm around the perimeter of your table is a good guideline.
If you’re short on space then perhaps having a bench or two which can be stored under the table when not in use is an option, or choose a table leg style similar to the X or Spider Shape which are aesthetically pleasing, will minimise the requirement for space and won’t be in the way when seated.
Whatever size you require you can feel rest assured that we’ll make it to both fit your space and be functional for your family.
Choosing the correct leg option is an important aspect when designing your table.
Your table legs must be both aesthetically pleasing to look at and offer practicality when in use.
The placement of table legs is equally as important and can be set to accommodate your seating plans.
We produce legs in five different design led styles; X, Square, A, Trapezium and Spider frame.
Each style brings with it various benefits and can be crafted in Steel, Painted Redwood and European Oak in a virtually unlimited number of colours.
All the legs we supply arrive with felt pads to prevent damage and scratches to your flooring.
X Frame Legs
Due to the functionality of being able to push both benches and chairs away when not in use X legs are a popular space saving choice. X Legs offer more flexibility than other leg options by maximising the seating space on all sides.
Square Frame Legs
Whilst not offering the same space saving qualities as X Frame legs, Square Frame brings a contemporary aspect to a room and can be set closer to the end of the table to accommodate extra seating along the sides.
A Frame Legs
A Frame Legs bring a classic appearance to a table and depending on the size of your table can be setup to accommodate seating all around the table or simply down the sides.
Trapezium Frame Legs
Trapezium Frame Legs bring a contemporary appearance to a table. The functional aspects are not to different from the square frame legs and can be fixed closer to the ends to maximise seating capacity.
Spider Frame Legs
Spider Legs are our most popular leg option, and whilst being more expensive than other options, offer complete functionality with regard to maximising your space and seating capacity.
Available In Steel Only.
There will be many factors that go into selecting the right tonal option for your dining table and when done correctly it’ll help pull everything together.
Considerations should be the physical space you have available, the natural light entering the room, other furniture tones, and the textures of any soft furnishings or accessories that’ll be sharing the same space.
Size & Lighting in The Room
The natural light that flows into your dining room is the first step in determining which tonal options will work best. If your room is small and doesn’t get enough sunlight, consider lighter tones to lift the area, make it feel lighter and more spacious. Likewise, if your space is larger with lots of light, consider a darker tone with lighter walls and make it a statement piece.
The Design Scheme of The Room
The second step is to contemplate the colour scheme of the room. Think in terms of temperature.
Paint colours often give a feeling of warmth or cold. Current trends are using colours of whites, neutrals, greens, and blues. White & Blue can feel cooler in temperature and often lend themselves to darker brown furniture tones.
Greens feel a little warmer and work well with both neutrals and honey tones. Accessorised well neutral-coloured tables also work with neutral wall colours.
When selecting a tonal option its also good to have splashes of the same colour in the form of other items of free-standing furniture, shelving, and accessories to help pull everything together.
Avoid trying to match kitchen cabinetry or flooring as it’ll all blend and the table will appear lost. Consider opting for two tones darker or complimenting other items of furniture in the same space.
Tonal Options & Samples
Need a sample – Meraki Woodcraft have dozens of tonal options available and offer a free sample service when collected.
The sample sizes are 150mm x 150mm and demonstrative of the texture and tone you have chosen.
Samples are limited to three per customer. A postage and packaging charge of £10 applies when samples are shipped and will be refunded off your piece of furniture at the point of invoice.
